HWACHEON Machinery Europe

C2

Horizontal turning centre for chuck sizes of Ø200 mm and tool magazine

C1/C2 - Front side
C1/C2 - Tool magazin
C1/C2 - Interior
C1/C2 - Working cabinet
C1/C2 - Interior
C1/C2 - Interior
C1/C2 - Ready peace conveyor

Ideal for complex workpieces in small batches - for maximum flexibility. Thanks to its travelling column design, with its orthogonal X, Y and Z axes, the C2 unifies the machining characteristics of a lathe with the fabrication characteristics of a machining centre. This means that workpieces with complex contours can also be machined to an exceptional level of precision. At the same time, a sub spindle allows two machining steps to be carried out without clamping errors.

Additional tool magazine with 12 positions

Features: 
Linear guideway
Y-Axis
Driven tools
Sub spindle
Extra tool magazin
NC Controls: 
Fanuc 0i
Siemens 828D

Horizontal turning centre for chuck sizes of Ø200 mm and tool magazine

Ideal for complex workpieces in small batches - for maximum flexibility. Thanks to its travelling column design, with its orthogonal X, Y and Z axes, the C2 unifies the machining characteristics of a lathe with the fabrication characteristics of a machining centre. This means that workpieces with complex contours can also be machined to an exceptional level of precision. At the same time, a sub spindle allows two machining steps to be carried out without clamping errors.

Additional tool magazine with 12 positions

The particularly robust 18-position turret (BMT-55 und C4) with driven tools does not have a sensitive spindle bearing, as is the case with turning and milling centres, and is therefore outstandingly well-suited to heavy cutting tasks, and carrying out such tasks with short cycle times. In addition, the machine has a 12-position wheel magazine with Capto-C4 holders which can be equipped with different tools during main time, so that all turning and milling tasks can be carried out in one operation, without interruption. Whilst a process is still running, and machining is still underway, the machine can thus be set up for the next workpiece.

High rigidity linear rolling guideways permit rapid traverse speeds, dynamic machining and reduce non-productive time. Due to the high quality of the components used and the thermal stability of the new turning centre, high precision is ensured even during high-speed processes carried out in round-the-clock operation.

Configurations

Y MC S
C1 Std. Std. Optional
C2 Std. Std. Optional
MC: Turret with Driven Tools | Y: Y axis | S: Sub spindle | L: Long bed version | A/B/C: Chuck and Bar size

Machine series

In very small batch productions which require many tools, the compact C series allows set-up for the next order without affecting main time. Tools are exchanged into the 18-position turret by means...

C1/C2 - Front side
Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine
Linear guideway, Y-Axis, Driven tools, Sub spindle, Extra tool magazin
C1/C2 - Front side
Horizontal turning centre for chuck sizes of Ø200 mm and tool magazine
Linear guideway, Y-Axis, Driven tools, Sub spindle, Extra tool magazin

Technical Information

ItemUnitC1C2
Axis-Stroke (X / Y / Z)mm310 / 100 / 700360 / 120 / 700
Spindle powerkW11 / 7.515 / 11
Spindle speedrpm60005000
Rapid speedm/min30 / 15 / 30
Tool shankBMT-55 / C4
Number of tools18 + 12
Machine weightkg1050010800
Max. cutting diametermm530630
Max. cutting lengthmm599564
Chuck-Sizemm155200
Swing over bedmm730
Max. Bar sizemm5165
Sub spindle speedrpm6000
Sub spindle motor powerkW7.5 / 5.515 / 11
Coolant tank vol.Liter200230
Spindle torqueNm477 / 233

All rights reserved, all indications without engagement, subject to modifications.

Videos

YouTube
C - Series