HWACHEON Machinery Europe

SIRIUS-850

Vertical machining centre with box guideways and a table size of 2,150 x 850 mm (max. 4 t)

SIRIUS-850 - Front side
SIRIUS-850 - Operator panel
SIRIUS-850 - Table
SIRIUS-850 - Box guide ways
SIRIUS-850 - Wide box guide ways
SIRIUS-850 - Die and mold
SIRIUS-850 - Table
SIRIUS-850 - Table

The SIRIUS-850 is a vertical machining centre with a cross table design. The Y axis is equipped with four very wide hand-scraped box guideways, which have been designed for heavy workpieces. The high-torque oil-cooled HWACHEON spindles (8,000 or 12,000 rpm, 420 Nm, 30 kW) allow for optimum surface finishes with maximum precision even when operated for long periods at high cutting rates.

Features: 
Box guide ways
Cross table
3 axis
NC Controls: 
Fanuc 31i
Heidenhain TNC 640

Vertical machining centre with box guideways and a table size of 2,150 x 850 mm (max. 4 t)

The SIRIUS-850 is a vertical machining centre with a cross table design. The Y axis is equipped with four very wide hand-scraped box guideways, which have been designed for heavy workpieces. The high-torque oil-cooled HWACHEON spindles (8,000 or 12,000 rpm, 420 Nm, 30 kW) allow for optimum surface finishes with maximum precision even when operated for long periods at high cutting rates.

Integrated spindle motors

At Hwacheon, only the most highly trained and experienced employees work on spindle construction. Spindle assembly takes place in climate-controlled clean rooms and all spindles are subjected to extensive long-term tests and checks before they are approved for installation.

Oil-chilled spindles

Hwacheon's spindle cooling system, whereby oil continuously flows through the spindle bearing as well as the surface of the casing of the integrated motor, lubricates and regulates the temperature of the entire spindle. Sensors in the spindle monitor the temperature, allowing it to be actively regulated. At the same time, increases in temperature are calculated on the control side and compensated for.

Box guideways

The machining centre is equipped with four very wide box guideways on the Y axis. This allows very good absorption of vibrations by the solid cast iron bed and high table loadings of up to 4 tonnes.

Air floating system

In order to minimise the break loose torque and the stick-slip effect, the gap in the box guideways is charged with compressed air. This ensures the optimal distribution of the guideway oil and particularly smooth movement over small distances and during oscillatory movements.

Optimal stability for heavy workpieces and cutting tasks

For twenty years, the SIRIUS-850 has been in demand for its stability and performance. Amongst discerning users, it stands for reliability and precision. The box guideways guarantee the best surface finish, long tool life and the absorption of vibrations. Through the use of compressed air on the bearing face of the box guideways, incomparably fluid and gentle movements are possible, even with heavy workpieces. This is reflected in the accuracy of the contours and the surface finish. The easily accessed and observable working space makes work easier. The ease of crane loading, the complete housing of the working space and the extensive Hwacheon software features make the SIRIUS-1050 a very productive and ergonomic machining centre.

Machine series

The cross table design machining centres for use in tool, mould, and die making as well as heavy duty cutting have extremely high-torque oil-cooled spindles. Due to their stability and performance,...

SIRIUS-850 - Front side
Vertical machining centre with box guideways and a table size of 2,150 x 850 mm (max. 4 t)
Box guide ways, Cross table, 3 axis
SIRIUS-1050 - Table
Vertical machining centre with box guideways and a table size of 2,500 x 850 mm (max. 5 t)
Box guide ways, Cross table, 3 axis

Topic related

Technical Information

ItemUnitSIRIUS-850SIRIUS-1050
Axis-Stroke (X / Y / Z)mm2000 / 850 / 7502500 / 1050 / 850
Table sizemm2150 x 8502800 x 1050
Table loadkg40005000
Spindle powerkW30 / 25
Spindle speedrpm8000
Spindle torqueNm420 / 239
Feedratemm/min1-8000
Rapid speedm/min20 / 20 / 16
Tool shankBBT-50
Number of tools24
Machine weightkg2071031700
Coolant tank vol.Liter10201250

All rights reserved, all indications without engagement, subject to modifications.