HWACHEON Machinery Europe

T2

Twin turret lathe for large batch sizes (65 mm bar capacity)

T2 - Front side
T2 - Two turrets
T2 - Two turrets
T2 - Transfere to sub spindle
T2 - Heavy and compact machine bed

Dynamic twin turret lathe with 8 inch chuck: The T2 provides high performance, dynamism and reliability with a small footprint and many options for automation. If complex workpieces need to be produced in large numbers, the upper and lower turrets can be used in parallel.
Both turrets have 12 tool stations (BMT-65), which can also be equipped with driven tools. Its rapid indexing time of just 0.1 s per station and the high drive power of the integrated 7.5 kW servomotor reduce non-productive time to a minimum and maximise your efficiency.

Features: 
Linear guideway
Y-Axis
Driven tools
Sub spindle
Two turrets
NC Controls: 
Fanuc 0i
Fanuc 31i
Siemens 828D

Twin turret lathe for large batch sizes (65 mm bar capacity)

Dynamic twin turret lathe with 8 inch chuck: The T2 provides high performance, dynamism and reliability with a small footprint and many options for automation. If complex workpieces need to be produced in large numbers, the upper and lower turrets can be used in parallel.
Both turrets have 12 tool stations (BMT-65), which can also be equipped with driven tools. Its rapid indexing time of just 0.1 s per station and the high drive power of the integrated 7.5 kW servomotor reduce non-productive time to a minimum and maximise your efficiency.

The high torque of the integrated 477 Nm spindle motor and the particularly good damping properties of the machine bed permit high cutting rates and long tool life. All drives, both in the turrets and in the spindles, are actively cooled and thus reduce thermal growth in the FEM-optimised machine bed. This ensures the consistent accuracy of the T2 during operation over multiple shifts and during continuous operation.

In order to fulfil their high standards of quality, Hwacheon also focuses on vertical integration in the case of the T2. Because for us, there is only one standard of quality: the best.
The T2 turning centre thus incorporates a turret, motor spindle and a bed designed and manufactured by Hwacheon.

Ergonomic design and extensive optional features

The user-friendly design of the T2 is comfortable to work with, meaning that you can concentrate on what matters: producing high quality products whilst not wasting any time with laborious handling, and doing so under conditions of maximum workplace safety. The large number of optional features allows you to configure your machine according to your requirements in terms of performance and precision.

Configurations

Y MC S 2nd Turret (bottom)
T2 Optional Optional Optional Optional
MC: Turret with Driven Tools | Y: Y axis | S: Sub spindle | L: Long bed version | XL: Extra Long bed version | A/B/C: Chuck and Bar size

Machine series

The T series provides high performance, dynamism and reliability with a small footprint and many options for automation. If complex turned parts need to be produced in large numbers, the upper and...

T2 - Front side
Twin turret lathe for large batch sizes (65 mm bar capacity)
Linear guideway, Y-Axis, Driven tools, Sub spindle, Two turrets

Topic related

Technical Information

ItemUnitT2
Spindle powerkW15 / 11
Spindle speedrpm5000
Spindle torqueNm179 / 131.4
Tool shankBMT-65
Number of tools12 (+12)
Machine weightkg7500
Max. cutting diametermm460
Max. cutting lengthmm444
Chuck-Sizemm210
Swing over bedmm880
Max. Bar sizemm65
Sub spindle speedrpm5000
Sub spindle motor powerkW15 / 11
Coolant tank vol.Liter260

All rights reserved, all indications without engagement, subject to modifications.

Videos