HiREX-4000 - Highly productive machining centre with a travelling column design | Hwacheon (Europe)
HWACHEON Machinery Europe

HiREX-4000

Highly productive machining centre with a travelling column design

Multi-tasking

  • Very large range of travel on the X axis of 4 metres
  • High productivity as working space partition (optional) permits set-up during main time
  • Stable box guideways on all axes
  • Rapid traverse speeds (X/Y/Z): 30/36/36 m/min
  • Spindle speed: 10,000 rpm
  • Tool change times: 1.7 seconds
  • Optimal swarf removal through flooding of the entire length of the X axis with coolant
  • Internal coolant supply (optional): 30 or 70 bar

Numerical controls

Features: 
Linear guideway
Travelling Column
3 axis
NC Controls: 
Fanuc 0i
Siemens 828D

Highly productive machining centre with a travelling column design

Multi-tasking

  • Very large range of travel on the X axis of 4 metres
  • High productivity as working space partition (optional) permits set-up during main time
  • Stable box guideways on all axes
  • Rapid traverse speeds (X/Y/Z): 30/36/36 m/min
  • Spindle speed: 10,000 rpm
  • Tool change times: 1.7 seconds
  • Optimal swarf removal through flooding of the entire length of the X axis with coolant
  • Internal coolant supply (optional): 30 or 70 bar

Numerical controls

  • Siemens 828D
  • Fanuc 0i-MD

All rights reserved, all indications without engagement, subject to modifications.

Similar Machines

VESTA-1300 - Front side

VESTA-1300

Vertical machining centre with linear guideways and X traverse path 1,300 mm
The VESTA-1300 stands on a grey cast iron bed with a cross table design and is equipped with dynamic linear guideways on all axes. It is characterised by its versatility in different areas of applicat...
Linear guideway
Cross table
3 axis
VESTA-2000 - Front side

VESTA-2000

Vertical machining centre with linear guideways, and X traverse path 2,000 mm
Large working space with 2,000 x 850 mm table for workpieces of up to 1,800 kg: The VESTA-2000 a new build size in HWACHEON’s VESTA series. The traverse paths of 2,000 x 850 mm and the cross table, wh...
Linear guideway
Cross table
3 axis
VESTA-1300B - Front side

VESTA-1300B

Vertical machining centre with box guideways and X traverse path 1,300 mm
The VESTA-1300B - ideal for particularly ductile materials and high cutting rates. Thanks to its broad box guideways and solid cast iron body, the VESTA-1300B has ideal stability and damping character...
Box guide ways
Gear spindle
Cross table
3 axis